+86-15712686880 / +86-576-82424800
 |
| Quantity: | |
|---|---|
MFP-170ZDM
MECO
The MFP-170ZDM is a ceiling and floor mounted fan coil unit designed for spaces that require flexible installation arrangements. This unit supports three mounting methods: ceiling-mounted, floor-standing, and high wall-mounted, allowing project managers to select the configuration that matches the interior layout and architectural constraints of each room. The multi-mount design reduces the need for different product SKUs across a single project, simplifying procurement and inventory management for commercial applications.
The unit features a streamlined rectangular casing with integrated air intake grilles and a frontal air discharge slot. The exterior casing uses a white powder-coated finish, compatible with most standard ceiling and wall color schemes in office buildings, hotels, and healthcare facilities.
The MFP-170ZDM delivers the following thermal performance under standard test conditions:
Parameter | Value | Unit |
Cooling capacity (high speed) | 30708 | BTU/h |
Cooling capacity (total heat, high) | 6746 | W |
Cooling capacity (sensible heat, high) | 23017 | W |
Heating capacity (high speed) | 13500 | W |
Heating capacity (medium speed) | 10557 | W |
The unit operates across three fan speed settings with corresponding airflow and static pressure ratings:
Parameter | High | Medium | Low | Unit |
Air volume | 1360 | 1280 | — | m³/h |
External static pressure | 0 | — | — | Pa |
Acoustic and electrical performance data by fan speed:
Parameter | High | Medium | Low | Unit |
Noise level | 48 | — | — | dB(A) |
Power input | 152 | 148 | — | W |
The coil assembly uses hydrophilic aluminum fins mechanically bonded to copper tubes. This configuration provides a measured heat exchange surface area optimized for balanced airflow and thermal transfer. The maximum working pressure of the coil is 1.6 MPa, making the unit suitable for installations with variable water pressure conditions.
The unit is equipped with a centrifugal fan assembly with three selectable speed settings. The motor and fan combination is calibrated to deliver the rated air volume while maintaining the published noise levels.
Both inlet and outlet water connections use ZG3/4" threaded ports. The pressure drop across the coil at rated flow is 32 kPa. The unit includes a condensate drain pan with a 26 mm drain connection for removal of condensed water during cooling operation.
The MFP-170ZDM ships with a remote controller as the standard control interface. Additional controller types are available as options to match different project requirements. The unit can be integrated with most widely used building management systems that support the Modbus communication protocol, enabling centralized monitoring and control across commercial facilities.
This ceiling floor mounted fan coil unit is specified for a range of commercial and institutional spaces including hotel guest rooms, private offices, hospital patient rooms, retail boutiques, and classroom environments. The three mounting options allow engineers to specify a single model across rooms with different ceiling heights and interior layouts.
The unit supports three installation configurations: ceiling-mounted, floor-standing, and high wall-mounted. Project teams can select the mounting method based on available space and interior design requirements.
The heat exchanger coil has a maximum working pressure rating of 1.6 MPa.
Yes, the MFP-170ZDM can interface with building management systems that use the Modbus protocol.
Both the water inlet and outlet ports use ZG3/4" threaded connections.
